◆ Reagent
Browse
› Chemicals used in Plasticizer
Chemicals used in Plasticizer
48 substances
Substances reported for “Plasticizer” in US EPA Chemical Data Reporting.
1,3-butadiene; buta-1,3-diene
CAS 106-99-0
2,4,6-tris(dimethylaminomethyl)phenol
CAS 90-72-2
2-ethylhexyl acrylate
CAS 103-11-7
3-aminopropyldimethylamine; N,N-dimethyl-1,3-diaminopropane
CAS 109-55-7
3a,4,7,7a-tetrahydro-4,7-methanoindene
CAS 77-73-6
BBP; benzyl butyl phthalate e
CAS 85-68-7
Benzene
CAS 71-43-2
Benzoic Acid
CAS 65-85-0
Butyl Acetate
CAS 123-86-4
Cyclohexanone
CAS 108-94-1
Distillates (petroleum), hydrotreated heavy paraffinic; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 100 SUS at 100 °F (19cSt at 40 °C). It contains a relatively large proportion of saturated hydrocarbons.]
CAS 64742-54-7
Distillates (petroleum), solvent-refined heavy naphthenic; Baseoil — unspecified; [A complex combination of hydrocarbons obtained as the raffinate from a solvent extraction process. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 100 SUS at 100 °F (19cSt a 40 °C). It contains relatively few normal paraffins.]
CAS 64741-96-4
Distillates (petroleum), solvent-refined heavy paraffinic; Baseoil — unspecified; [A complex combination of hydrocarbons obtained as the raffinate from a solvent extraction process. It consists predominantly of saturated hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 100 SUS at 100 °F (19cSt at 40 °C).]
CAS 64741-88-4
Phenoxyethanol
CAS 122-99-6
Residual oils (petroleum), solvent-dewaxed; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by removal of long, branched chain hydrocarbons from a residual oil by solvent crystallization. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400 °C (752 °F).]
CAS 64742-62-7
Silica
CAS 7631-86-9
Styrene
CAS 100-42-5
Succinic Acid
CAS 110-15-6
acrylic acid; prop-2-enoic acid
CAS 79-10-7
adipic acid
CAS 124-04-9
alkanes, C14-17, chloro; chlorinated paraffins, C14-17
CAS 85535-85-9
benzothiazole-2-thiol
CAS 149-30-4
benzyl benzoate
CAS 120-51-4
bis(2-ethylhexyl) phthalate; di-(2-ethylhexyl) phthalate; DEHP
CAS 117-81-7
bis(2-methoxyethyl) ether
CAS 111-96-6
carbon monoxide
CAS 630-08-0
di-tert-butyl peroxide
CAS 110-05-4
diallyl phthalate
CAS 131-17-9
diammonium peroxodisulphate; ammonium persulphate
CAS 7727-54-0
dibenzoyl peroxide; benzoyl peroxide
CAS 94-36-0
dibutyl phthalate; DBP
CAS 84-74-2
dibutyltin dilaurate; dibutyl[bis(dodecanoyloxy)]stannane
CAS 77-58-7
dicyclohexyl phthalate
CAS 84-61-7
diisobutyl phthalate
CAS 84-69-5
dodecyldiphenyl phosphate
CAS 27460-02-2
ethylene
CAS 74-85-1
isobutyl methacrylate
CAS 97-86-9
methyl methacrylate; methyl 2-methylprop-2-enoate; methyl 2-methylpropenoate
CAS 80-62-6
phthalic anhydride
CAS 85-44-9
reaction mass of: cis-1,4-dimethylcyclohexyl dibenzoate; trans-1,4-dimethylcyclohexyl dibenzoate
CAS 35541-81-2
sulphanilic acid; 4-aminobenzenesulphonic acid
CAS 121-57-3
tert-Butanol
CAS 75-65-0
tert-butyl 2-ethylperoxyhexanoate
CAS 3006-82-4
tert-butyl hydroperoxide
CAS 75-91-2
tetraethyl N,N'-(methylenedicyclohexane-4,1-diyl)bis-dl-aspartate
CAS 136210-30-5
tributyl phosphate
CAS 126-73-8
triethyl phosphate
CAS 78-40-0
α-chlorotoluene; benzyl chloride
CAS 100-44-7
Each entry links to full GHS hazard data. Classifications from ECHA Annex VI & PubChem.
All categories
·
API